MAINTENANCE ON CHASSIS AND ENGINE
Checking the front brake linings
9.38
Warning
Danger of accidents Reduced braking due to worn brake linings.
–
Worn brake linings should be replaced immediately in an authorized KTM workshop.
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Top up brake fluid to level
Guideline
Measurement of
Brake fluid DOT 4 / DOT 5.1 (
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Position the cover with the membrane. Mount and tighten screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.
100036-10
–
Remove the wheel/wheels. (
.
with membrane
.
.
p. 194)
p. 123)
5 mm (0.2 in)
108