MAINTENANCE ON CHASSIS AND ENGINE
Checking rear brake linings
9.46
Warning
Danger of accidents Reduced braking due to worn brake linings.
–
Worn brake linings should be replaced immediately in an authorized KTM workshop.
–
Top up the brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Refit screw
Info
Clean up overflowed or spilt brake fluid immediately with water.
100050-10
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the rear brake linings.
100038-10
.
p. 194)
with membrane
.
x
.
≥ 1 mm (≥ 0.04 in)
(
p. 122)
118