Checking The Play In The Bowden Cable Using The Reverse; Gear Release Lever; Adjusting The Play In The Bowden Cable Using The Reverse Gear Release Lever - KTM 450 XC Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE
Checking the play in the Bowden cable using the reverse gear release lever
9.24

Adjusting the play in the Bowden cable using the reverse gear release lever

9.25
–
Move the handlebar to the straight-ahead position. Move the reverse gear release lever
back and forth slightly to ascertain the play in the Bowden cable
Guideline
Play in the Bowden cable on the reverse

gear release lever

» If the Bowden cable play on the reverse gear release lever does not agree with the
specifications:
–
Adjust the play in the Bowden cable using the reverse gear release lever.
(
600141-10
–
Check that the Bowden cable is correctly laid from the reverse gear release lever.
–
Move the handlebar to the straight-ahead position.
–
Release the nut
the reverse gear release lever.
Guideline
Play in the Bowden cable on the reverse
gear release lever
–
Tighten nut
600141-11
p. 96)
and using the screw
 
.

.

10 mm (0.39 in)
, adjust the play of the Bowden cable
10 mm (0.39 in)
96
on
