MAINTENANCE ON CHASSIS AND ENGINE
–
Remove the radiator cap
600123-11
–
Open the plug of the compensation tank
–
Remove the screws
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Position the compensating tank
Guideline
Remaining screws, chassis
–
Move the ventilation hose
–
Mount and tighten the screws
600124-10
Guideline
Remaining screws, chassis
. Completely drain the coolant.
.
and empty the compensating tank
. Mount and tighten screws
M6
up.
and
with new seal rings.
M6
155
.
.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)