MAINTENANCE ON CHASSIS AND ENGINE
–
Adjust the distances
and
Guideline
Toe
Front
Info
The toe is the difference in length between distances
ing straight ahead. The distance is measured at the height of the wheel center from rim flange to rim flange.
–
Tighten nuts
and
.
Guideline
Lock nut, tie rod, outside
Lock nut, tie rod, inside
Info
The tie rods
must still be freely movable.
Checking/adjusting camber
9.15
Info
The left and right camber should have the same settings.
The operations are the same on the left and right.
to the specified value by evenly rotating the tie rods
x
–
Jack up the vehicle. (
.
0 mm (0 in)
and
by which the wheels are spaced at the front or rear when driv-
M12x1.25
M12LHx1.25
p. 66)
20 Nm (14.8 lbf ft)
20 Nm (14.8 lbf ft)
85