Fork Offset - KTM 450 XC Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Fork offset

9.16
The fork offset has an impact on the handling of the vehicle.
The fork offset can optionally be adjusted.
Fork offset is defined as the slanted position of the swivel axis in the direction of the longitudinal axis of the vehicle in relation to a verti-
cal line to the driving surface.
When both sleeves are installed in front of the A-arms, the fork offset increases. This enhances driving stability on fast raceways.
When both bushings are installed behind the A-arms, the fork offset decreases. This improves handling in bends.
Upon delivery one bushing is installed in front of the A-arm and one behind it.
–
Position the A-arm with the bushings
Guideline
Screw, A-arm top
600126-10
–
Align the heim joint at right angles to the screws
Guideline
Nut, A-arm top
Info
All four heim joints must be checked and adjusted if necessary.
–
Remove the vehicle from the work stand. (
600128-10
. Mount and tighten screws

M10x52
and tighten the nut

M12x1.25
p. 66)
87
.

45 Nm
(33.2 lbf ft)
.

30 Nm
(22.1 lbf ft)