Mounting The Seat - KTM 525 XC ATV EU Setup Instructions

WORK
Removing the seat
3.1

Mounting the seat

3.2
Removing the rear fender
3.3
–
Pull the release hook
remove from above.
601070-10
–
Hook slot

seat and slide tab
100046-10
–
Push down the rear of the seat until release hook
–
Make sure that the seat is correctly locked in.
601071-10
–
Remove the seat (
–
Remove screws
601078-10
back. Lift up the seat at the rear, pull it back and then

on the seat into collar sleeve
under fuel tank .
 
p. 5)
.

of the fuel tank, lower the rear of the

engages.

5