MAINTENANCE ON CHASSIS AND ENGINE
Installing the front trim
9.68
Removing the rear fender
9.69
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Connect the plug-in connectors of the head light and the emergency OFF switch with
the rip cord and position the front trim.
–
Mount all screws.
–
Fully tighten screws
Guideline
Screw on fuel tank
–
Fully tighten screws
Guideline
Remaining screws, chassis
–
Install the front cover. (
100076-10
–
Remove the seat (
.
M6
.
M6
p. 138)
p. 134)
140
6 Nm (4.4 lbf ft)
10 Nm (7.4 lbf ft)