Stopping, Parking - KTM 450 XC Owner's Manual

RIDING INSTRUCTIONS
Alternative 1
Switch off the engine using the ignition key.
–
Turn the key in the ignition switch to the position
Info
All power-consuming components are switched off.
Alternative 2
Switch off the engine using the ENG. STOP switch.
–
Press the ENG. STOP switch into the position
Info
All power-consuming components are switched off.
Alternative 3
Switch off the engine using the emergency OFF switch with a rip cord.
–
Pull off clip . (Figure 100010-10

Info
When the engine is switched off using the emergency OFF switch, the power-consuming components are not switched off.
All power-consuming components that are switched on (head lights, tail light, CDI, etc.) continue consuming electricity.
This uses battery power and causes it to discharge.

Stopping, parking

7.16
Warning
Danger of burns Some vehicle components get very hot when the machine is driven.
–
Do not touch hot components such as exhaust system, radiator, engine, shock absorber and brakes. Allow these components to
cool down before starting work on them.
.
or press OFF.
p. 35)
58