MAINTENANCE ON CHASSIS AND ENGINE
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Check that the sliding plate
insert the brake linings.
Info
Make sure that the decoupling plate
brake pad.
100067-10
–
Grease the bearing bolt
brake caliper support
Lubricant (T625) (
100068-10
–
Swing the brake caliper downward. Mount and tighten the screw.
Guideline
Screw, rear brake caliper
–
Operate the foot brake lever repeatedly until the brake linings lie on the brake disc and
there is a tight spot.
100069-10
is seated correctly in the brake caliper support and
is mounted on the piston side of the
and insert the brake caliper with the bearing bolt into the
.
p. 198)
M6
10 Nm
(7.4 lbf ft)
121
Loctite
®
243™