MAINTENANCE ON CHASSIS AND ENGINE
Ignition curve plug connection
9.59
Changing ignition curve
9.60
–
Remove the front trim. (
Changing the ignition curve from Performance to Soft.
–
Connect the plug-in connector
Soft – The plug-in connector is connected for better driveability. (
Change the ignition curve from Soft to Performance.
–
Disconnect the plug-in connector
Performance – The plug-in connector is disconnected for better performance. (
–
Install the front trim. (
The plug-in connector
Possible states
Soft – The plug-in connector is connected for better driveability.
•
Performance – The plug-in connector is disconnected for better performance.
•
100105-10
p. 138)
. (Figure 100105-10
. (Figure 100105-10
p. 140)
is located under the trim at the front on the frame tube.
p. 133)
p. 133)
p. 133)
p. 133)
133