Installing The Battery - KTM 450 XC Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Installing the battery

9.55
–
Switch off all power-consuming components and switch off the engine.
–
Remove the rear fender. (
–
Disconnect the negative (minus) cable
–
Pull back the plus pole cover and disconnect the positive (plus) cable
–
Loosen the rubber band
–
Remove the battery.
200150-10
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Place the battery in the battery holder.
4Ah battery (YTX5L-BS) (
–
Reconnect the rubber band
–
Attach the plus cable and replace the plus pole cover
–
Connect the negative (minus) cable
–
Install the rear fender. (
200150-11
p. 140)
of the battery.

.

p. 189)
.

of the battery.

p. 142)
of the battery.

.

127