Adjusting The Toe Width Of Rear Axle - KTM 450 XC Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Adjusting the toe width of rear axle

9.19
Warning
Danger of accidents Modifications to the chassis can seriously alter the vehicle's handling characteristics.
–
Following modifications, ride slowly at first to get the feel of the new handling characteristics.
2 2
0 0 1
1
3 0 0 3
0 0
x
–
Engage 1st gear.
–
Loosen nuts
–
Jack up the vehicle. (
–
Remove the nuts
–
Check parts for damage and wear. Replace damaged or worn parts.
Info
The left and right toe width should have the same settings.
100102-10
Setting a narrow toe width:
–
Mount the wheel hub
–
Mount the conical ring
–
Mount the spacing sleeve
–
Mount the washer and the new self-locking nut.
100103-10
of the wheel hubs on both sides.

p. 66)
on both sides and take all parts off of the rear axle.

.

with the cone facing outward.

with the cone facing inward.

89