Mounting The Seat - KTM 450 XC ATV 2008 Setup Instructions

TASKS
3 T ASKS
Removing the seat
3.1

Mounting the seat

3.2
Removing the rear fender
3.3
–
Pull the release hook
remove from above.
100041-10
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Hook the slot
of the seat and slide the tab
100046-10
–
Push down the rear of the seat until the release hook
–
Make sure that the seat is correctly locked in.
100043-10
–
Remove the seat (
–
Remove screws
200149-10
back. Lift up the seat at the rear, pull it back and then
1
on the seat into the collar sleeve
1
under the fuel tank
2
P. 4)
. Remove the collar sleeves.
1
of the fuel tank, lower the rear
A
.
B
engages.
3
4