Mounting Oil Filter; Filling Up With Engine Oil - KTM 525 XC ATV 2008 Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE
x

Mounting oil filter

Filling up with engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Disconnect the ground cable
Remove screws
600137-10
Pull the oil filters
Circlip pliers reverse (51012011000)
Completely drain the engine oil.
Thoroughly clean parts and sealing area.
600138-10
Check parts for damage and wear. Replace damaged or worn parts.
Fill the oil filters
600147-10
Oil the O-rings of the oil filter covers and mount them with the oil filter covers.
Mount and tighten screws
Specification
Screw, oil filter cover
Connect the ground cable
Specification
Screw, starter engine
600137-10
x
Remove the screw cap
Engine oil
Mount and tighten screw cap
600132-10
from the engine.
and . Take off the oil filter cover with the O-ring.
and out of the engine housing.
and with engine oil and place in the oil filter container.
and .
M5
on the engine and tighten the screw.
M6
on the clutch cover and fill up with engine oil.
2.00 l (2.11 qt.) External tem-
perature:
( 32 °F)
External tem-
perature: < 0 °C
(< 32 °F)
.
75
6 Nm (4.4 lbf ft)
10 Nm (7.4 lbf ft)
Engine oil
0 °C (SAE 10W/50)
( P. 95)
Engine oil (SAE
5W/40) ( P. 96)