MAINTENANCE ON CHASSIS AND ENGINE
Removing rear brake linings
9.47
Warning
Danger of accidents Improper brake maintenance and repair.
–
Always have your brake system maintained and repaired in an authorized KTM workshop.
x
–
Press the brake caliper by hand on to the brake disc in order to press back the brake
piston.
100063-10
–
Loosen the screw
the screw by approx. 10 turns and use the screw to press the bearing bolt out of the
brake caliper. Remove screw.
100064-10
while holding the hexagonal head
of the bearing bolt. Unscrew
119