View The Shapes Table - LI-COR C-DiGit User Manual

4. Click OK.
Note: If you close Image Studio, your filtering criteria are preserved.

View the Shapes Table

1. Click the Shapes tab at the bottom of the main window to view the data for
each shape.
2. The default columns are defined below.
a. Image Name - Original acquisition name
b. Channel - Chemi
c. Name - Shapes are assigned a number in sequential order. Double-click on
the number in the column to edit the shape name.
d. Signal - The Signal is the sum of the individual pixel intensity values (Total)
for a shape minus the product of the average intensity values of the pixels in
the background (Bkgnd.) and the total number of pixels enclosed by the
shape.
e. Total - Sum of the individual pixel intensities for the shape
f. Area - Total number of pixels enclosed by a shape
g. Bkgnd. - Designated background subtraction
h. Type - Signal or Background
i. Conc. Std. - Value of the concentration defined for this shape
j. Concentration - Calculated value of the concentration based on the
standards for the shape
3. Move, add, delete, sort, and filter the columns in the same way as in the Images
Table.
Image Studio Software
C-DiGit User Manual
4
4-59