The image acquisition will start, and the target image will be displayed as a
series of six images of various brightness/contrasts (Step 14).
Click
here
image.
14. Adjust Target Image
Verify that your target image acquisition is similar to that shown below. If it
matches, your C-DiGit is functioning correctly. NOTE: Store the Target in its
envelope when not in use. You will generally not need to use the Target after
this initial verification step; it may be used later, however, for diagnostic
purposes if there is a problem with the instrument.
Click on the best image; that image will open in a new window (below),
allowing for further adjustment, if desired. Click on Signal, Background, or
Midtones to adjust the brightness for these channels, if needed. Click Done.
Quick Start Tutorial
to watch a video that demonstrates how to acquire an
C-DiGit User Manual
2
2-11