LI-COR C-DiGit User Manual page 2

Notes on Safety
LI-COR products have been designed to be safe when operated in the manner
described in this manual.
The safety of this product can not be guaranteed if the product is used in any other
way than is specified in this manual. The C-DiGit Blot Scanner is intended to be
used by qualified personnel. Read this entire manual before using the C-DiGit Blot
Scanner.
Equipment Markings
!
Manual Markings
WARNING
CAUTION
NOTE
IMPORTANT Information of importance to prevent procedural mistakes in the
WARNING: This equipment generates, uses, and can radiate radio frequency energy and if not
installed in accordance with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide a reasonable
protection against such interference when operated in a commercial environment. Operation of
this equipment in a residential area is likely to cause interference in which case the user, at his
own expense, will be required to take whatever measures may be required to correct the
interference.
CE Marking
This product (model number 3600) is a CE-marked product. For conformity
information, contact LI-COR Support at biosupport.licor.com. Outside of the U.S.,
contact your local sales office or distributor.
The product is marked with this symbol when it is necessary for you to
refer to the manual or accompanying documents in order to protect
against damage to the product.
Warnings must be followed carefully to avoid bodily injury.
Cautions must be observed to avoid damaging your equipment.
Notes contain additional information and useful tips.
operation of the equipment or related software. Failure to comply
may result in a poor experimental outcome but will not cause
bodily injury or equipment damage.
Federal Communications Commission
Radio Frequency Interference Statement
ii