Link Luts Across Filtered Images; Profiles - LI-COR C-DiGit User Manual

4
Image Studio Software

Link LUTs Across Filtered Images

The "Link LUTs Across Filtered Images" check box at the top of the LUT Panel
forces all images currently in the filtered Images Table to use the same curves as
those applied to the display of the selected image. When the Image LUTs are
linked, any changes that you make to the curves affect all images in the filtered
view regardless of the view mode (single image or multi-image).
Note: The checkbox is only enabled after a filter has been defined and applied to
the Images Table. It is grayed out if no filter has been applied.
The LUT values will differ depending on the instrument and acquisition settings
used. Linking the LUT values of images from different instruments, or from the
same instrument with different acquisition settings, will not provide accurate
comparisons.

Profiles

The Profiles tab displays a lane, band, or shape profile. When a band or shape is
selected, the profile is displayed corresponding to the band or shape.
C-DiGit User Manual 4-31