LI-COR C-DiGit User Manual page 112

4. Connect the USB and Power Cables
Plug the power supply into a wall outlet, and plug the power cord into the
receptacle on the C-DiGit back panel (below). Connect the flat (Type A)
connector on the USB cable to your computer, and the square (Type B)
connector to the C-DiGit Blot Scanner back panel at the connector labeled
'USB'.
Computer
USB Connection
5. Turn on C-DiGit Blot Scanner
Power C-DiGit Blot Scanner on with the power switch on the back panel. The
blue power light on the instrument front panel (below) illuminates and blinks
when the instrument is first powered on, and stops blinking when the
instrument has fully started up and is ready to use.
6. New Hardware Wizard Starts
You may see a variety of dialogs for installing new hardware.
Windows XP Installation Instructions
AC Power
C-DiGit
Power Connection
C-DiGit Blot Scanner
C-DiGit
USB Connection
C-DiGit User Manual
B
B-3