LI-COR C-DiGit User Manual page 22

2
Quick Start Tutorial
NOTE: You can find the serial number on a label on the underside of the
instrument.
When a connection is established, the green indicator light (below) will
illuminate on the instrument front panel, and the Status panel in the Image
Studio window will display 'Ready'.
NOTE: C-DiGit Blot Scanner uses IPv6 and IPv4 Link-Local Addressing to
automatically create an IP network without any user configuration or additional
servers. If you experience connection problems, be sure that IPv6 is enabled
on the computer.
12. Expose the C-DiGit Blot Scanner Target
Open the Target envelope and expose the side of the Target with the gray
background to room light for 30 seconds. Place the Target face down (gray
background) on the C-DiGit Blot Scanner scanning surface.
Expose this side.
C-DiGit User Manual 2-9