Table of Contents
Advertisement
4
Image Studio Software
Status
Mouse over the C-DiGit logo to display the C-DiGit Instrument Status bar, which
shows the serial number and instrument software version of the instrument that is
currently connected (below). If an instrument is not connected, the Status display
will show 'Not Available', as shown above.
Setup
No Analysis – An analysis is not performed after the image acquisition is finished.
Automated analysis options are not available with C-DiGit.
Image Table Info – Opens a dialog where you can enter initial values for the image
table columns (below).
The values entered in the dialog above are used for all new images created during
the current Image Studio session; this automates data entry for the table headers so
that you do not need to re-enter the information for each image.
C-DiGit User Manual
4-34
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
