4
Image Studio Software
View Mode
Select Single in the View Mode group (below) to view and analyze a single image.
Click the Multi-Image View button and select the number of images to view from
the drop-down menu.
Note: Analyses cannot be performed in Multi-Image View.
Slide Show
Click Start to view the images in the Table sequentially. Click Stop to return to the
normal static view. Click the arrow (>) on the Slide Show group to open the Slide
Show Parameters menu. Choose to display the images in the Table and stop at the
end (Play until end of list), or return to the beginning of the table and continue
displaying the images (Loop continuously). Move the slider to adjust the time each
image is displayed.
Create
Click a button in the Create group to create a new image acquisition file with the
designated action applied. The original image acquisition remains unchanged.
C-DiGit User Manual
4-40