LI-COR C-DiGit User Manual page 78

c. To view the shapes and labels on the image, enable the Shapes and Labels
check boxes in the Show group. Disable the check marks to remove the
shapes and labels from the image.
d. To edit the label, click the Shapes tab at the bottom of the screen to view
the Shapes Table. Under the Name column, double-click on the cell for the
selected shape and edit the text. Press Enter, and the new text will appear
on the image. To change the location of the label, click the small arrow on
the Show group to open the Image View Labels menu.
Note: You must press Enter or click on another cell in the Table to save the change
to the Table cell before saving the acquisition.
Note: Select Draw Rectangle, Draw Ellipse, or Draw Freehand to manually draw
shapes. Drag the mouse to create the shape. The resulting shape can be moved or
resized in the same way that an auto shape is moved or resized.
4. To quickly add shapes, use the Add Selection tool.
a. Drag a rectangle around the shapes to select them. Dotted lines indicate the
shapes are selected.
b. Click Add Selection in the Create group.
c. Click the image to add the shapes to the image.
d. To move the shapes, drag the four-pointed cursor that appears within either
shape. The selected shapes move together.
Note: You can also rotate shapes by selecting them, pressing the Ctrl key, and
scrolling with the mouse, or by clicking the Rotate button in the Edit group of the
Shapes tab.
Image Studio Software
C-DiGit User Manual
4
4-46