LI-COR C-DiGit User Manual page 76

3. Drag the small box in the middle of the image to center the crop marks. Drag
the corners of the larger box to surround the marker and bands.
4. Click Current Image to mark this image with these crop marks and click OK.
Small crop marks indicating the corners of the cropped area appear on the
image at the new location.
Note: If Images in images table is selected, this cropping definition applies to all
images in the Images Table.
Note: The small crop marks appear on the image as long as Apply is selected. The
cropping definition will apply to any print or export action. To remove the small
crop marks and print or export the full image, click Apply again to toggle off.
Image Studio Software
C-DiGit User Manual
4
4-44