Ricoh MP C6502 series Operation Manual page 258

10. Troubleshooting
Message
"Exceeded max. number of
files to print for temporary /
stored jobs."
"Exceeded max. number of
pages to print for
temporary / stored jobs."
"Failed to obtain file system." PDF direct printing could not
"File system is full."
"Folding Unit Error."
"I/O buffer overflow."
208
Causes
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum file capacity was
exceeded.
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.
be performed because the
file system could not be
obtained.
PDF file does not print out
because the capacity of the
file system is full.
There is a problem with the
Multi-Folding Unit.
An input buffer overflow
occurred.
Solutions
Delete unneeded files stored in the
machine.
Delete unneeded files stored in the
machine.
Reduce the number of pages to print.
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
Delete all unnecessary files from the
hard disk, or decrease the file size sent
to the machine.
Contact your service representative.
• In [Printer Features], under [Host
Interface], select [I/O Buffer],
and then set the maximum buffer
size to a larger value.
• Reduce the number of files being
sent to the machine.