Ricoh MP C6502 series Operation Manual page 97

Program name
Unified-size scan
Digital signature
scan
Dividing file scan
High resolution
scan
Batch document
scan
Scan to XXXX
(replace XXXX by a
destination name)
Storage scan:
XXXX
(replace XXXX by a
folder name)
Facsimile mode
Program name
Transmission result
notification fax
Program description
In [Scan Settings], select [Mixed
Original Sizes] in [Scan Size] and
specify the finished size of scanned
data in [Reduce / Enlarge] under
[Edit].
In [Send File Type / Name], specify
[PDF] in [File Type], and also
specify [Digital Signature].
Specify [Divide] in [Original Feed
Type].
Specify settings to save scanned
data in TIFF format. Also, specify a
higher resolution in [Scan Settings].
Select [Batch] in [Original Feed
Type].
Select e-mail or folder destinations
from the list that is registered in the
machine's Address Book, and then
specify the scan settings.
Specify a folder in [Target Folder to
Store] in [Store File].
Program description
Select [Preview] in the initial display
and specify [E-mail TX Results] in [TX
Mode].
Registering Functions in a Program
Effect
You can skip this procedure to unify
the size when reprinting scanned
data.
You can add a digital signature to
an important document such as a
contract, so that any data tampering
can be detected.
You can scan a multiple page
original as one file by splitting it into
groups of a specified number of
pages.
Scanned documents maintain much
of the detail of the originals, but the
size of the data may be quite large.
You can apply multiple scans to a
large volume of originals and send
the scanned originals as a single
job.
If you register destinations and scan
settings that you use often, you can
skip the procedures to specify them
when sending a scanned file.
You can use folders to organize
stored files by user name or
intended use.
Effect
You can check whether the
transmission settings are correct
before and after transmission.
47