Temp Data Clear - Riso HC5500 Series User Manual

4.9 Temp Data Clear

If a check mark is placed at [Keep the last page of the job in the printer.] in [Controller setting 2] - [Initial setting] of [Adminis-
trator] of RISO Console, the last page of previous printing (last sheet in case of duplex printing) is left in the controller as retained
data. If retention of data after printing is not desired because of a confidential document, the data can be cleared.
To clear the temporary data when printing stops temporarily, use "Menu 7 Job Clear" to clear the current job and then clear the tem-
porary data.
"Menu 7 Job Clear")p.2-54
1
Press the MENU Key.
2
Press the
"Configuration."
3
Press the OK Key.
4
Press the
"Temp Data Clear."
5
Press the OK Key.
6
Check the message. To clear the data,
press the OK Key.
Message "Executing ..." is displayed and the data is
cleared. If the CANCEL Key is pressed, the screen in
step 4 reappears.
7
Press the OK Key.
When the screen in step 4 reappears, you can continue
setting.
To exit the setting, press the PRINT PAUSE Key.
2-28
or key to display
or key to display