Loading Paper - Riso HC5500 Series User Manual

Loading Paper

The method of loading paper in the Paper Feed Trays and the Standard Paper Feed Tray is described below.
~ ~ ~ ~ Number of Sheets That Can Be Loaded
The number of sheets that can be loaded in the Feed Trays and the Paper Feed Tray are shown below.
The number of sheets that can be loaded varies with the thickness of paper.
When 85gm
Paper Feed Tray 1
Paper Feed Tray 2
StandardPaper Feed Tray
~ ~ ~ ~ Paper to Be Loaded in the Standard Paper Feed Tray
When using paper shown below for printing, load the paper in the Standard Paper Feed Tray with the print face up.
• Special paper such as thick paper
• Paper for which printing has been performed onto the back side
• Paper larger than A3/Ledger size
• Paper smaller than B5 size such as postcard
• Envelope
~ ~ ~ ~ Registration of the paper
After loading paper in the Standard Paper Feed Tray  Paper Feed Tray 1 Paper Feed Tray 2, you must register the charac-
teristics of the paper. For registration, use "4.1 Standard Feed Tray" "4.2 Feed Tray 1" "4.3 Feed Tray 2" of the menu set-
ting according to the location of paper setting.
The details of setting are shown below.
• Paper size
• Paper type
• Double feed check
When loading paper for which printing has been performed onto the back side, envelopes or paper with a dark ground colour,
select "OFF."
If these items are not set properly, when printing directed, the printer may judge that no paper is loaded and may not print
appropriately. Be sure to register these items.
"Menu 4 Configuration")p.2-18
1-10
2
(22.6-lb bond) is used:
1,000 sheets
500 sheets
1,000 sheets