Paper Size - Riso HC5500 Series User Manual

Loading Paper (Paper Feed Tray 1     Paper Feed Tray 2)
1
Pull out the Paper Feed Tray until it
stops.
2
Turn down the Side Guide Locking
Levers to the "FREE" positions and
spread the guides to the outermost
positions.
3
Adjust the Paper Top Guide to the

paper size.

z z z z First, remove the Paper Top Guide.
While pressing the release buttons in the direction
shown by the arrow, remove the stopper just above.
z z z z Then, set the Paper Top Guide.
While pressing the release buttons, insert the Paper
Top Guide by adjusting the
Top Guide to the position of the paper size to be set.
When loading A3/Ledger size paper, do not use the
Paper Top Guide. Remove the Paper Top Guide and
insert it into the holder in the Paper Feed Tray.
4
Load paper by positioning the centre
of the paper to the centre mark ( )
inside the Paper Feed Tray.
If the front side quality is different from the back side
quality, load paper with the print face down. Do not
exceed the upper limit label.
Take care the paper is not bent at the Paper Top Guide.
mark of the Paper

1-11