Paper Size Entry - Riso HC5500 Series User Manual

5.1 Paper Size Entry

Five non-standard paper sizes can be registered.
When using non-standard size paper, be sure to register the size in advance.
Registered values are displayed in Paper Size of "4.1.1 Standard Feed Tray," "4.2.1 Feed Tray 1," and "4.3.1 Feed Tray 2."
If the paper sizes have been registered, the registered values will be displayed.
~ ~ ~ ~ Range of paper size that can be set
Printer
Printer (with finisher installed)
• Be sure to set this item before proceeding to "4.1.1 Standard Feed Tray," "4.2.1 Feed Tray 1," and "4.3.1 Feed Tray 2."
• The registered sizes can also be changed.
• To clear a registered paper size, set the paper size to "000 mm x 000 mm."
If a paper size is registered for the Standard Feed Tray or another feed tray and paper of the registered size is actually set, the size
cannot be deleted from the choices of "Paper Size."
• If an optional HC Finisher is connected, the paper sizes that can be used depend on the Finisher functions to be used. For details,
see "HC5500 User's Manual for Printer Driver."
1
Use steps 1 to 4 () ) ) ) p.2-31) to display
"Administration."
2
Press the
"Paper Size Entry".
3
Press the OK Key.
4
Press the
the desired number to be registered.
5
Press the OK Key.
The submenu of "Paper Size Entry" is displayed.
2-32
Width (Vertical)
90 - 340mm
9 3
(3 / - 13 / ")
16 8
100 - 330mm
15
(3 / - 13")
16
or key to display
or key to display
Length (Horizontal)
148 - 550mm
13 5
(5 / - 21 / ")
16 8
148 - 488mm
13 3
(5 / - 19 / ")
16 16
6
Press the
sor, and press the
enter the paper size.
7
Press the OK Key.
To exit the setting, press the PRINTPAUSE key.
keys to move the cur-
keys to