Paper Type - Riso HC5500 Series User Manual

4.1.1/4.2.1/4.3.1 Paper Size
• To use non-standard size paper, register the size to be used in "5.1 Paper Size Entry" of the menu setting in advance. After the size
is registered, paper of the size can be used.
• If you use non-standard size paper without paper size entry, a paper jam may occur.
• Paper sizes that can be set are different between the Standard Feed Tray and the other feed trays (1 and 2).)p.2-19
• When setting for Feed Tray 1 Feed Tray 2, if a registered size is not adequate for the feed tray, the registered paper will not be dis-
played.
• If an optional HC Finisher is connected, some paper sizes cannot be used. Paper sizes that cannot be used are not displayed in this
menu.
1
Check that "Paper Size" is displayed.
2
Press the OK Key.

4.1.2/4.2.2/4.3.2 Paper Type

• Paper types that can be set are different between the Standard Feed Tray and the other feed trays.)p.2-19
• When the registered paper is used in the Standard Feed Tray, adjust also the Paper Feed Pressure Adjustment Lever according to the
paper thickness.
1
Press the
"Paper Type."
2
Press the OK Key.
2-20
or key to display
3
Press the or
desired size.
4
Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
To exit the setting, press the PRINTPAUSE key.
3
Press the or
desired paper type.
4
Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
To exit the setting, press the PRINTPAUSE key.
key to select the
key to select the