Menu 6 Feed Tray Selection - Riso HC5500 Series User Manual

Menu 6 Feed Tray Selection

If the paper conditions of data received from a computer and the setting of "5.8.17 Tray Selection Rule" do not match the conditions
of any of the Standard Feed Tray and other feed trays, printing will not start. In this case, you can specify the Standard Feed Tray or
another feed tray where the printer paper is set and start printing with no trouble.
~ ~ ~ ~ Selectable Feed Trays
Selectable feed trays
Auto
Standard Feed Tray
Feed Tray 1
Feed Tray 2
1
Press the MENU Key.
2
Press the or
"Feed Tray Selection."
3
Press the OK Key.
4
Press the or
desired feed tray.
5
Press OK Key.
When the screen in step 2 reappears, you can continue set-
ting.
To exit the setting, press the PRINTPAUSE key.
Selectable feed trays are shown below.
Normally, set "Auto." A feed tray proper for data from the computer and the setting of "5.8.17 Tray
Selection Rule" is automatically selected.
Printed onto paper in the Standard Feed Tray.
Printed onto paper in Feed Tray 1.
Printed onto paper in Feed Tray 2.
key to display
key to select the

2-53