Riso HC5500 Series User Manual page 46

4.4 Feed Tray Relay
Sets whether or not to feed paper continuously
by changing automatically the feed trays.
4.5 Triple-Tray Source
Sets whether or not the Standard Feed Tray is
selected in automatic tray selection.
4.6 Job Separation
Selects whether or not to perform Job Separa-
tion in printing and selects the type of this func-
tion.
4.7 Print Density
Adjusts the density of overall prints.
4.8 Paper Ejection
Sets the Paper Receiving Tray.
4.8.1 Eject Wing
Sets the shape of the Eject Wing Adjust.
4.8.2 Stack Guide
Adjusts the Stack Guide position.
4.8.3 Stack Guide Adjust
Sets the Adjusted Position in 4.8.2.
4.8.4 Shifting Guide
Sets the Stack Guides move position
when the Stack Guide OpenButton is
pressed.
4.9 Temp Data Clear
Clears temporary data.
4.10 Image Area
Sets the maximum print area.
4.11 Cover Sheet Tray
Sets the paper to be loaded in the Cover Sheet
Tray of the optional HC Finisher.
4.11.1 Paper Size
Menu 5 Administration
Sets the basic information of the printer.
5.1 Paper Size Entry
Registers non-standard paper sizes.
Up to five sizes can be registered.
(5.1.1 - 5.1.5)
5.2. Paper Type Entry
Registers paper types. Up to five types can be
registered.(5.2.1 - 5.2.5)
In addition, registers paper feed control of cer-
tain paper.(5.2.6 - 5.2.12)
2-6
Item Details of setting (range)
ON
OFF
ON
OFF
OFF
Between Jobs
Every Division
(If this function is set with the printer driver, the value is
displayed.)
Density-Level 1/2/3/4/5
(If the density is set with the printer driver, the value is
displayed.)
Auto
Special
Auto
Adjusted Position
OFF
Side Guides: -20mm to +20 mm (-
End Guide: -20mm to +20 mm (-
End Guide
Side Guides
End & Side Guides
-
Standard
Maximum
Auto
A3A4B4B5A4-RB5-R/Ledger/Legal/Letter/Let-
ter-R
000 × 000mm
90mm - 340mm × 148mm - 550mm (3
13 5
5 / " - 21 / ")
16 8
Refer-
ence
)p.2-21
)p.2-22
)p.2-23
)p.2-24
)p.2-25
13 13
/ " to + / ")
16 16
13 13
/ " to + / ")
16 16
)p.2-28
)p.2-29
)p.2-30
)p.2-31
)p.2-32
9 3
/ " - 13 / " ×
16 8
)p.2-33