Feed Tray Relay - Riso HC5500 Series User Manual

4.1.3/4.2.3/4.3.3 Double Feed Check
1
Press the or
"Double Feed Check."
2
Press the OK Key.

4.4 Feed Tray Relay

Sets whether or not to enable the Feed Tray Relay function that uses Feed Trays 1 and 2 and the Standard Feed Tray. Up to 2,500
sheets of printing can be performed continuously without adding paper.
Useful Feature
In the following cases:
The Feed Tray Relay function is useful in the following cases.
• Paper of the same size and type is always used. (*)
• More than 1,000 sheets of printing is performed at a time.
* When using paper of the same size and type, set "5.8.17 Tray Selection Rule" to "Size & Tray."
Mechanism of Feed Tray Relay
If you set Feed Tray Relay, when Feed Tray 2 becomes empty of paper, Feed Tray 1 will be automatically selected and printing will continue.
In addition, if "4.5 Triple-Tray Source" is set to ON, the Standard Feed Tray can also be selected for paper feed with this function.
The order of priority of tray selection is Standard Feed TrayoFeed Tray 2 oFeed Tray 1.
"4.5 Triple-Tray Source")p.2-22
~ ~ ~ ~ Settings
OFF Feed Tray Relay is disabled.
ON Feed Tray Relay is enabled.
The feed tray set for separation paper (5.3 Separation Paper) is not selected as a feed tray for Feed Tray Relay or Auto Tray Selec-
tion in "Menu 6 Feed Tray Selection.")p.2-53.
1
Press the MENU Key.
2
Press the or
"Configuration."
3
Press the OK Key.
key to display
key to display
3
Press the or
or OFF.
4
Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
To exit the setting, press the PRINTPAUSE key.
4
Press the or
"Feed Tray Relay."
5
Press the OK Key.
The submenu of Feed Tray Relay is displayed.
key to select ON

key to display
2-21