Image Area (Maximum Print Area) - Riso HC5500 Series User Manual

4.10 Image Area (Maximum Print Area)

With this machine, a certain area of space is left along the edges of paper regardless of the original size. Normally, use the setting
"Standard." If the image is larger than the printable area, the relevant part of the image is not printed. (Reduction is not per-
formed.)
~ ~ ~ ~ Settings
Standard Printing can be performed into the area 3mm (
Print Area : 310mm × 454mm (12
Maximum Printing can be performed into the area 1mm (0.04") inside from the sides of paper.
Maximum Print Area : 314mm × 458mm (12
• If the image is larger than the guaranteed print area ()p.viii), deterioration of print quality such as blur of characters and pictures may
occur depending on the original image.
• Even if the paper size is larger than 316mm × 460mm (12
3 5
(12 / " × 18 / ".)
8 16
• If "Maximum" is selected, the interior of the machine and the paper may be stained with ink.
1
Press the MENU Key.
2
Press the or
"Configuration."
3
Press the OK Key.
4
Press the or
"Image Area"
5
Press the OK Key.
The submenu of "Image Area" is displayed.
6
Press the or
3 7
/ " × 17
16
7
/
16
key to display
key to display
key to select.
1
/ ") inside from the sides of paper.
8
/ ")
8
3 5
/ " × 18 / ")
8 16
1
" × 18 / "), the actual maximum printable area is 314mm × 458mm
8
7
Press the OK Key.
When the screen in step 4 reappears, you can continue
setting.
To exit the setting, press the PRINT PAUSE Key.

2-29