Riso HC5500 Series User Manual page 43

When an Error Occurs
When an error occurs, an error number and its description are displayed in the Message Display. For error numbers, refer to
"Chapter 3 Troubleshooting")p.3-1.
~ ~ ~ ~ Status
The status of the printer is displayed. The following messages are displayed.
Message
Please Wait a Moment
Warming Up
Ready
Receiving Data
(The Data Indicator blinks.)
Printing Mode Off
Printing
Cooling Down
Shutting Down
~ ~ ~ ~ Print Quantity Display
The number of printed copies and the preset number of copies for printing are displayed.
For collated printing, the preset number of sets and the number of printed sets are displayed. For non collated printing, the pre-
set number of sheets and the number of printed sheets are displayed.
~ ~ ~ ~ Duplex Display
This display appears when duplex printing is set.
~ ~ ~ ~ Original Size/Tray Display
The selected tray and the size and the orientation of the papers are displayed.
If a feed tray is specified individually, the specified tray is displayed.
If automatic selection of a feed tray is set, "Auto" is displayed, and during printing, the paper size is displayed.
If mixed sizes of originals are set, the largest size is displayed.
Meaning
The printer is warming up or is being restored from an error.
Printing cannot be performed.
The printer is warming up because the temperature of the print head is low.
The printer is ready to receive data.
The printer is receiving data for printing from a computer.
The printer is waiting for a print instruction from the Operation Panel.
The printer is printing or processing data.
The printer is cooling down because the temperature of the print head is high.
The printer shuts down.

2-3