Riso HC5500 Series User Manual page 66

1
Press the MENU Key.
2
Press the
"Configuration."
3
Press the OK Key.
4.8.1 Eject Wing
1
Ensure that "Eject Wing" is displayed.
2
Press the OK Key.
4.8.2 Stack Guide
1
Press the
"Stack Guide."
2
Press the OK Key.
3
Press the
method of adjusting the positions.
2-26
or key to display
or key to display
or key to select the
4
Press the or
"Paper Ejection."
5
Press the OK Key.
The submenu of "Paper Ejection" is displayed.
3
Press the or
4
Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
To exit the setting, press the PRINTPAUSE key.
4
Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.
If "Adjusted Position" is selected, adjust the amount
of movement in 4.8.3.
To exit the setting, press the PRINTPAUSE key.
key to display
key to select.