Menu 4 Configuration - Riso HC5500 Series User Manual

Menu 4 Configuration

Functions concerning printing such as size and type of paper to be loaded in the feed trays and the Job Separation function can be set.
~ ~ ~ ~ Functions
The functions that can be set are shown below.
z z z z 4.1 Standard Feed Tray
4.2 Feed Tray 1
4.3 Feed Tray 2
)p.2-19
Set the size and type of paper to be loaded in the Standard Feed Tray and the other feed trays and turn on or off the Double Feed
Check function.
z z z z 4.4 Feed Tray Relay )p.2-21
Sets whether or not to enable the Feed Tray Relay function that uses Feed Tray 1 and Feed Tray 2. If "4.5 Triple-Tray Source"
is set to "ON," feed trays including the Standard Feed Tray can be used for Feed Tray Relay.
z z z z 4.5 Triple-Tray Source )p.2-22
Sets whether or not to include the Standard Feed Tray into feed trays for selection when instructing printing without specifying
the tray (Auto tray selection) from the printer driver.
z z z z 4.6 Job Separation )p.2-23
Inserts separation paper between jobs or every division such as set or page when printing multiple sets.
z z z z 4.7 Print Density )p.2-24
Selects the print density from five levels.
z z z z 4.8 Paper Ejection)p.2-25
Sets the adjustment of the Auto Stacking Tray and Eject Wing.
z z z z 4.9 Temp Data Clear )p.2-28
Clears temporary data in the printer.
z z z z 4.10 Image Area )p.2-29
Sets the maximum print area.
z z z z 4.11 Cover Sheet Tray )p.2-30
Sets the paper to be loaded in the Cover Sheet Tray of the optional HC Finisher.
2-18