Basic Printing Operation
After connection and preparation are complete, perform trial printing. This section describes the basic operation method of "Direct
Printing", namely printing data created in the computer without storing data in the printer.
• Required software must be installed in the computer in advance.
For details, refer to the separate "HC5500 Series User's Manual for Printer Driver."
• Check that the printer is on and the consumables are set before printing.
Print Operation Flow
Printing from the Computer (Windows)
This section describes a print instruction using RISO Controller HC3R-5000 from Microsoft Word 2000 as an example.
1
Check that the printer and the computer are turned on.
If the printer is in the sleep mode or if the RISO console screen cannot be displayed on the computer, use the RISO Wakeup Tool
to start the printer and then carry out steps 2 and after.
For details, refer to separate "HC5500 Series User's Manual for Printer Driver."
2
Open the file to print.
Start the application software to open the original data file to print.
3
Display the [Print] dialog box.
1-17