Riso HC5500 Series User Manual page 115

Problem
Although paper is set, "No Paper" error
can occur.
[Paper size] and [Paper type] set in the printer driver screen do not match those in
the menu setting on the printer.
Even if proper paper is loaded in the feed tray, if the settings of "Paper Size" and
"Paper Type" of the menu setting on the printer are not correct, "No Paper" error
occurs. Set the conditions of the feed tray according to the paper in the feed tray.
Alternatively, a condition is set at "Tray selection Rule." Ensure that the paper
placed in the tray matches the condition of the tray setting.
"Configuration 4.1/4.2/4.3" )p.2-19
"5.8.17 Tray Selection Rule" )p.2-50
Press the Cancel/Back key to display the output paper size at the lower left of the
operation panel. Check the size and set paper of the correct size or specify the
proper tray from the operation panel of the printer to perform printing. If you spec-
ify the Feed Tray on the Operation Panel of the printer, printing can be performed.
"Menu 6 Feed Tray Selection" )p.2-53
The selected tray is set for "Separation Paper."
Set "5.3 Separation Paper" of the menu setting to "OFF."
"5.3 Separation Paper" )p.2-36
The Standard Feed Tray is not a feed tray for auto feed tray selection.
If "4.5 Triple-Tray Source" is set to "ON", the Standard Feed Tray is included into
feed trays for selection when "Auto feed tray selection" is selected in "Paper feed
tray" of the printer driver.
"4.5 Triple-Tray Source" )p.2-22
Cause and Solution

3-21