Phone User Interface; Web User Interface - Yealink SIP-T46G Administrator's Manual

Updating the firmware
If the access URL of the firmware is defined in the configuration file, the IP phone will
download the firmware from the provisioning server. If the MD5 value of the
downloaded firmware file differs from that of the image stored in the flash memory, the
IP phone performs a firmware update.
Downloading the resource files
In addition to configuration file(s), the IP phones may require resource files before it can
deliver service. These resource files are optional, but if some particular features are
being employed, these files are required.
The followings are examples of resource files:



After connected to the power and network, the IP phone starts the initializing process by
cycling through the following steps:
1.
2.
3.
4.
If the IP phone has successfully passed through these steps, it starts up properly and is
ready for use.
You can use the following methods to set up and configure IP phones:



The following sections describe how to configure IP phones using each method above.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Language packs
Ring tones
Contact files
The power indicator LED illuminates.
The message ―Initializing...Please wait‖ appears on the LCD screen during the IP
phone starts up.
The main LCD screen displays the following:
Time and date

Soft key labels

Press the OK key to check the IP phone status, the LCD screen displays the valid IP
address, MAC address, firmware version, etc.

Phone User Interface

Web User Interface

Configuration Files
Getting Started
11