Call Completion - Yealink SIP-T46G Administrator's Manual

Ultra-elegant gigabit ip phone
Hide thumbs Also See for SIP-T46G:
Table of Contents

Advertisement

Administrator's Guide for SIP-T46G IP Phone
To configure auto answer via web user interface:
1.
2.
3.
4.
5.
To configure auto answer via phone user interface:
1.
2.
3.
4.
The call completion feature allows users to monitor the busy party and establish a call
when the busy party becomes available to receive a call. There are several possible
factors which can prevent a call from connecting successfully.
The IP phones support call completion using the SUBSCRIBE/NOTIFY method, which is
64
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Phone User Interface
Click on Account.
Select the desired account from the pull-down list of Account.
Click on Basic.
Select the desired value from the pull-down list of Auto-Answer.
Click Confirm to accept the change.
Press Menu->Call Feature->Auto Answer.
Select the desired line and then press the Enter soft key.
Press
Press
or
or
, or the
, or the Switch soft key to select the desired value from the Auto
Answer field.
Press the Save soft key to accept the change.
Callee does not answer
Callee actively rejects the incoming call before answering
http://<phoneIPAddress>/servlet
?p=account-basic&q=load&acc
=0
Configure the auto answer
feature.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents