Call Transfer - Yealink SIP-T46G Administrator's Manual

Administrator's Guide for SIP-T46G IP Phone
Call transfer enables the IP phones to transfer an existing call to another party. The IP
phones support call transfer using the REFER method specified in RFC 3515 and offer
three types of transfer:



Normally, call transfer is completed by pressing the transfer key. The blind transfer on
hook and attended transfer on hook features allow the IP phone to complete the
transfer through on-hook.
When a user performs the semi-attended transfer, the semi-attended transfer feature
determines whether to display the prompt ―1 New Missed Call(s)‖ on the destination
party's phone LCD screen.
Procedure
Call transfer can be configured using the configuration files or locally.
Configuration File
Local
To configure call transfer via web user interface:
1.
2.
88
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Blind Transfer -- Transfer a call directly to another party without consulting. Blind
transfer is implemented by a simple REFER method without Replaces in the Refer-To
header.
Semi-attended Transfer -- Transfer a call after hearing the ringback tone.
Semi-attended transfer is implemented by a REFER method with Replaces in the
Refer-To header.
Attended Transfer -- Transfer a call with prior consulting. Attended transfer is
implemented by a REFER method with Replaces in the Refer-To header.
<y000000000028>.cfg
Web User Interface
Click on Features->Transfer.
Select the desired values from the pull-down lists of Semi-Attended Transfer, Blind
Specify whether to complete the
transfer through on-hook.
Configure the semi-attended
transfer feature.
For more information, refer to
Transfer on page 279.
Specify whether to complete the
transfer through on-hook.
Configure the semi-attended
transfer feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-transfer&q=load
Call