Auto Redial - Yealink SIP-T46G Administrator's Manual

Administrator's Guide for SIP-T46G IP Phone
To configure call waiting and call waiting tone via phone user interface:
1.
2.
3.
4.
5.
6.
The auto redial feature allows the IP phones to redial a busy number after the first
attempt. Both the number of attempts and waiting time between redials are
configurable.
Procedure
Auto redial can be configured using the configuration files or locally.
Configuration File
Local
To configure auto redial via web user interface:
1.
2.
3.
4.
62
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Press Menu->Call Feature->Call Waiting.
Press Press Press or or or , or the Switch soft key to select the desired value from the Call , or the , or the
Waiting field.
Press Press Press or or or , or the Switch soft key to select the desired value from the Play , or the , or the
Tone field.
(Optional.) Enter the call waiting on code in the On Code field.
(Optional.) Enter the call waiting off code in the Off Code field.
Press the Save soft key to accept the change.
<y000000000028>.cfg
Web User Interface
Phone User Interface
Click on Features->General Information.
Select the desired value from the pull-down list of Auto-Redial.
(If enabled) Enter the desired time interval (in seconds) in the Auto-Redial Interval
(1~300s) field.
The default time interval is 10s.
(If enabled) Enter the desired times in the Auto-Redial Times (1~300) field.
Configure the auto redial feature.
For more information, refer to

Auto Redial

on page 256.
Configure the auto redial feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure the auto redial feature.