Call Waiting - Yealink SIP-T46G Administrator's Manual

Administrator's Guide for SIP-T46G IP Phone
3.
4.
The call waiting feature allows the IP phones to receive a new call when there is already
an active call. The new call is presented to the user visually on the LCD screen. The call
waiting tone feature enables the IP phones to play a short tone when receiving a new
incoming call during a conversation. The tone is audible to remind the user of the new
incoming call. The call waiting tone feature works only if the call waiting feature is
enabled.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or
locally.
Configuration File
Local
60
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
(If enabled) Enter the desired delay time (in seconds) in the Inter Digit Time (1~14s)
field.
Click Confirm to accept the change.
<y000000000028>.cfg
Web User Interface
Phone User Interface
Configure the call waiting
feature.
For more information, refer to
Waiting on page 255.
Configure the call waiting
feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure the call waiting
feature.
Call