Yealink SIP-T46G Administrator's Manual page 307

Example
Parameter-
voice.tone.dial
voice.tone.ring
voice.tone.busy
voice.tone.congestion
voice.tone.callwaiting
voice.tone.dialrecall
voice.tone.record
voice.tone.info
voice.tone.stutter
voice.tone.message
voice.tone.autoanswer
Description
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Portugal

Spain

Switzerland

Sweden

Russia

United States

Chile

Czech ETSI

voice.tone.country = Austria
Configuration File
<y000000000028>.cfg
Customizes the tone for each condition.
tonelist = element[,element] [,element]...
Where
element = !F1+F2+F3+F4/Duration
F: the frequency of the tone (ranges from 200
to 7000 Hz). If set to 0 (0Hz), it means that the
phone does not play tone. A tone can be
composited at most four different
frequencies (value format: F1+F2+F3+F4).
D: the time duration (in milliseconds, ranges
from 0 to 30000ms) of ringing the tone.
You can configure at most eight different
tones for one condition, each tone separated
by comma (e.g., 250/200, 0/1000,
200+300/500, 600+700+800+1000/2000).
If you want the IP phone to play tones once,
add an exclamation mark ―!‖ before tones
(e.g., !250/200, 0/1000, 200+300/500,
600+700+800+1000/2000).
Appendix
295