Action Uri - Yealink SIP-T46G Administrator's Manual

L1-L27
F_CONFERENCE
F1-F4
MSG
HEADSET
RD
UP/DOWN/LEFT/RIGHT
Reboot
AutoP
DNDOn
DNDOff
Note
The variable value does not work with all events. For example, the variable value
―
For security reasons, the IP phones do not receive and handle the HTTP/HTTPS GET
request by default. You need to specify the trusted IP address for action URI. When the IP
phone receives a GET request from the specified IP address for the first time, the phone
LCD screen prompts the message ―Allow Remote Control?‖. You can specify one or more
trusted IP addresses on the IP phone. You can also configure the IP phone to receive and
handle the URI from any IP address.
Procedure
Specify the trusted IP address for Action URI using the configuration files or locally.
Configuration File
Local
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Variable Value
MUTE
‖ is only applicable when the IP phone is during a call.
<y000000000028>.cfg
Web User Interface
Phone Action
Press the Line key.
Press the Conference soft key.
Press the soft key.
Press the MESSAGE key.
Press the HEADSET key.
Press the REDIAL key.
Press the Navigation keys.
Reboot the IP phone.
Let the IP phone perform auto provisioning.
Activate the DND mode.
Deactivate the DND mode.
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
For more information, refer to

Action URI

Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-remotecontrl&q
=load
Configuring Advanced Features
on page 311.
149