Yealink SIP-T46G Administrator's Manual page 93

Procedure
Call hold can be configured using the configuration files or locally.
Configuration File
Local
To configure the call hold method via web user interface:
1.
2.
3.
To configure the call hold tone and call hold tone delay via web user interface:
1.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
<y000000000028>.cfg
Web User Interface
Click on Features->General Information.
Select the desired value from the pull-down list of RFC 2543 Hold.
Click Confirm to accept the change.
Click on Features->General Information.
Configuring Basic Features
Configure the call hold tone and
call hold tone delay.
Specify whether RFC 2543
(c=0.0.0.0) outgoing hold
signaling is used.
For more information, refer to
Hold on page 268.
Configure the call hold tone and
call hold tone delay.
Specify whether RFC 2543
(c=0.0.0.0) outgoing hold
signaling is used.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Call
81